backPowrót do 3/2015
Technical Issues
3/2015 pp. 25-32

Wpływ parametrów procesowych na wymianę masy i ciepła podczas adsorpcji wody na silikażelu

pdf Pobierz pełny tekst pdf


This paper presents the results of studies on the enhancement of heat and mass transfer in an adsorber which is the main element of an adsorption chiller. A silica gel/water adsorption pair was examined. Experimental studies that refer to adsorption dynamics in a layer of silica gel covering directly the heat exchanger pipe were performed. Adsorption was conducted under different process conditions. Gas flow rate and size of grains were changed. Breakthrough curves and temperature changes with time were determined.

Słowa kluczowe

adsorption, silica gel, water, adsorption chilling, heat and mass transfer enhancement


1. Rezk, A., Theoretical and experimental investigation of silica gel/water adsorption refrigeration systems. PhD thesis, United Kingdom, The University of Birmingham, 2012.

2. Wang, D., Zhang, J., Tian, X., Liu, D., Sumathy, K., Progress in silica gel – water adsorption refrigeration technology, Renewable and Sustainable Energy Reviews, 2014, 30, pp. 85–104.

3. Wang, R., Wang, L., Wu, J., Adsorption refrigeration technology: theory and application. John Wiley & Sons, Singapore, 2014.

4. Fan, Y., Luo, L., Souyri, B., Review of solar sorption refrigeration technologies: Development
and applications, Renewable and Sustainable Energy Reviews, 2007, 11, pp. 1758–1775.

5. Sharafian, A., Bahrami, M., Assessment of adsorber bed designs in waste-heat driven adsorption cooling systems for vehicle air conditioning and refrigeration, Renewable and Sustainable Energy Reviews, 2014, 30, pp. 440–451.

6. Xia, Z.Z., Wang, R.Z., Wang, D.C., Liu, Y.L., Wu, J.Y., Chen, C.J., Development and comparison of two-bed silica gel–water adsorption chillers driven by low-grade heat source, International Journal of Thermal Sciences, 2009, 48, pp. 1017–1025.

7. Chang, K.-S., Chen, M.-T., Chung, T.-W., Effects of the thickness and particle size of silica gel on the heat and mass transfer performance of a silica gel-coated bed for air-conditioning adsorption system, Applied Thermal Engineering, 2005, 25, pp. 2330–2340.

8. Critoph, R.E., Metcalf, S.J., Specific cooling power intensification limits in ammonia–carbon adsorption refrigeration systems, Applied Thermal Energy, 2004, 24, pp. 661–678.

9. Gantenbein, P., Adsorption speed and mass transfer zone analysis of water vapour on the solid sorbent materials zeolite and silica gel with the focus on the heat exchanger design,, (access: 12.11.2014).

10. Niazmand, H., Talebian, H.,  Mahdavikhah, M., Bed geometrical specifications effects
on the performance of silica/water adsorption chillers, International Journal of Refrigeration, 2012, 35, pp. 2261–2274.

11. Rezk, A., Al-Dadah, R., Physical and operating conditions effects on silica gel/water adsorption chiller performance, Applied Energy, 2012, 89, pp. 142–149.

12. Gwadera, M., Adsorpcja wody na silikażelu w adsorpcyjnych urządzeniach chłodniczych, Inżynieria i Aparatura Chemiczna, 2013, 52, s. 317–318.

13. Ng, K.C., Chua, H.T., Chung, C.Y., Loke, C.H., Kashiwagi, T., Akisawa, A., Saha, B.B., Experimental investigation of the silica gel-water adsorption isotherm characteristic, Applied Thermal Engineering, 2001, 21, pp. 1631–1642.

14. Sun, J., Besant, R.W., Heat and mass transfer during silica gel–moisture interactions, International Journal of Heat and Mass Transfer, 2005, 48, pp. 4953–4962.

15. Christy, A.,  Effect of heat on the adsorption properties of silica gel, International Journal of Engineering and Technology, 2012, 4, pp. 484–488.

16. Afonso, M.R.A., Silveira, V.Jr., Characterization of equilibrium conditions of adsorbed silica-gel/water bed according to Dubinin-Astakhov and Freundlich, Engenharia Térmica (Thermal Engineering), 2005, 4, pp. 3–7.

17. Gurgel, J.M., Andrade Filho, L.S., 2001. Thermal diffusivity and adsorption kinetics of silica-gel/water, Adsorption, 2001, 7, pp. 211–219.

18. Kupiec, K., Rakoczy, J., Gwadera, M., Zmiany temperatury w złożu adsorbentu w początkowych cyklach procesu adsorpcyjno-desorpcyjnego, Inżynieria i Aparatura Chemiczna, 2011, 50, s. 64–65.